Lineshaft conveyors can be used used for both transporting and accumulating products. Lineshaft makes use of a drive shaft which runs the length of the underside of the conveyor, and drives the load rollers individually... view entire article
Lineshaft conveyors can be used used for both transporting and accumulating products. Lineshaft makes use of a drive shaft which runs the length of the underside of the conveyor, and drives the load rollers individually using belts. Since the rollers are individually powered, lineshaft conveyor can easily be used for accumulation operations where there is a minimum amount of backpressure on the product being transported.
The driveshaft is powered by a motor. Some configurations of lineshaft conveyor allow the conveyor to run both forwards or backwards depending on the situation desired. Because there are fewer moving parts, todays lineshaft conveyor is typically quieter than traditional live roller conveyors. The belts also assist in reducing noise by holding the rollers firmly in place inside the frames which results in less rattling.
SJF is an authorized nationwide distributor of Omni conveyor. SJF can provide other popular brands at your request. We can provide custom conveyor solutions for clients large and small - nationwide. In fact, the employees in SJF's Genesys division are among the best in the business for providing cutting edge warehouse conveyor handling systems and solutions. Email us today to discuss your unique conveyor needs - or call us and speak with any of our friendly conveyor solutions specialists. [800-598-5532]
We also have several used lineshaft conveyor curves, drives, rollers and more available but not always listed. Please call SJF Sales at 800.598.5532 for additional details, and pricing on this and other used lineshaft conveyor.
| Description | Cost When New | As Low As |
|---|---|---|
| 35" W Lineshaft (32" useable) - 1.9" Rollers on 6" Centers - 6.5" H Frame | $82/ft | $33/ft |
| 27" Lineshaft | $70/ft | $25/ft |
| 24" Lineshaft | $65/ft | $25/ft |
| Metzger 33" OAW lineshaft | $70/ft | $30/ft |
| Rapistan 1256 Lineshaft Intermediates, 24.25" OAW | $65/ft | $25/ft |
| Automated Line Shaft, 24 W, 3 center, 1.9 dia. roller, 7 frame | call | $25.00/ft |
| Ermanco Line Shaft Inter, 18½" W, 3" center, 1.9 dia. roller, 4.5" Frame, 10'L | call | $25.00/ft |
| Ermanco, 18.5 W, Lineshaft, 24 zones, 1.9-3 Centers, 4.5 frame, 2 sensor rollers, and 3 air balls transfer rails per 7-6bed section | call | $35.00/ft |
| Ermanco, 18.5 W, Photo eye Lineshaft acc, 27 zones, 1.9-3 Centers, 4.5 frame, missing photo eyes | call | $20.00/ft |
| Ermanco, 24.5 W, Lineshaft acc. drive. 27 zones, 1.9"-3 Centers, 4.5" frame | call | $750.00 ea |
| Ermanco, 24.5 W, Lineshaft acc. Inter, 27 zones, 1.9-3 Centers, 4.5 frame | call | $25.00/ft |
| Ermanco - 30.5"oaw, Lineshaft, 1.9" dia rollers on 4" centers, 4.5" frame | $80.00/ft | $25.00/ft |
| Hytrol Line Shaft Inter, 22 W, 3 center, 1.9" dia. roller, 4.5" Frame, 10'L | call | $25.00/ft |
| Hytrol, 18 W, Lineshaft drive, 1.9"-3 Centers, 4.5 frame, 6-6 L | call | $25.00 ea |
| Interlake, 21 W, line shaft, 1.9"-3 Centers, 3.5 frame | call | $28.00/ft |
| Interlake, 21 W, Lineshaft, 1.9"-3 Centers, 7 frame | call | $28.00/ft |
| Description | Cost When New | As Low As |
|---|---|---|
| Lineshaft drive, 25.5 W | call | $650.00 ea |
| Lineshaft drives, 18.5 W, 1.9"-4 Centers, 4.5" frame | call | $650.00 ea |
| Lineshaft, 18.5 W, 1.9"-4 Centers, 4.5 frame | call | $25.00/ft |
| Lineshaft, 25.5 W, 1.9"-3 Centers, 4 frame | call | $25.00/ft |
| Lineshaft, 25 W, 1.9"-3 Centers, 5.5 frame | call | $25.00/ft |
| Mathews, 24 W, 30 zones, 1.9-3 Centers, 5 frame, has sensor rollers but no other carrier rollers, 3 dead rollers per zone | call | $30.00/ft |
| Rapistan Line Shaft Inter, 18Ό" W, 3" center, 1.9 dia roller, 4.5" Frame, 10-0 L | call | $25.00/ft |
| Rapistan Line Shaft Inter, 18½" W, 3" center, 1.9" dia. roller, 7" Frame, 10'-0 L | $67.00/ft | $20.00/ft |
| Rapistan Line Shaft Inter, 18½" W, 3" center, 1.9" dia. roller, 7.5" Frame, 10'-0 L | $67.00/ft | $20.00/ft |
| Rapistan Line Shaft Inter, 24½" W, 3 Center, 1.9 dia. roller, 7 Frame, 10'-0 L | call | $25.00/ft |
| Rapistan Line Shaft, 18Ό" W, Inter, 3 Centers, 1.9 dia. roller, 4.5" Frame, 10-0 L | call | $25.00/ft |
| Rapistan, 24.25 W, Lineshaft drive, 1.9"-3" Centers, pop out rollers, 48" L | call | $25.00 ea |
| Rapistan, 24.25 W, Lineshaft drive, 1.9"-3 Centers, pop out rollers, 7 frame, 10L | call | $25.00 ea |
| Rapistan, 24.25 W, Lineshaft UBT, Left & Right Hand Units | $1,350.00 ea | $450.00 ea |
| Description | Cost When New | As Low As |
| Versa Ferguson, 27 W, Lineshaft, 1.9"-3" Centers, 3.5 frame | call | $25.00/ft |
| Versa Ferguson, 27 W, Lineshaft, 1.9"-3" Centers, 6.5 frame | call | $25.00/ft |
| Versa Ferguson, 29 W, Lineshaft, 1.9"-4" Centers, 6.5 frame | $ 80.60/ft | $15.00/ft |
| Versa Line Shaft Inter, 29" W, 3 center, 1.9 dia. roller, 6.5" frame, 10'-0 L | call | $25.00/ft |
| Versa Line Shaft Inter, 6 center, 1.9 dia. roller, 6.5" Frame, 10'L | call | $20.00/ft |
| Versa, 24 W, Lineshaft drive, 1.9"-3" Centers, 12.5" frame, 48 L | call | $25.00 ea |
| Versa, 24 W, Lineshaft UBT, 1.9"-3 c /c, 12.5 frame, 48 long | $1350.00 ea | $300.00 ea |
| Versa, 24 W, Lineshaft, 1.9"-3" Centers, 6.5 frame | call | $25.00/ft |
| Versa, 25 W, Lineshaft, 1.9"-3 Centers, 6.5 frame | call | $25.00/ft |
Pricing & availability subject to change without notice.
Our sales representatives have access to one of the largest used equipment networks in the nation. If you can't find the material you're looking for on our website, click here to request a quote and one of our reps will contact you within 24 hours to help you find the material you need.
Items we usually have in stock, but not listed on the website include: used lineshaft conveyor component parts, adjustable conveyor stands, used lineshaft curves, used lineshaft conveyor controls, conveyer pulleys, used conveyer drives, used universal belt transfers, used conveyor feeders, lineshaft lift gates, used gearbox infeeds, used conveyor idlers, used conveyor junctions and more.
If you don't see it on this page, please call us. We'll be glad to help you track it down. 800.598.5532