Tag Archives: new vs used
Fact: There are more pallet rack options available to you now than at any time in history.
Fact: There are very significant differences between New, Used & Refurbished pallet racking.
Fact: You think you know everything there is to know about each – but really, you don’t.
The fact is, what one dealer says can often conflict with what another dealer says. As with any industry, there are several ways of doing something, but there are only a few ways of doing it right. The following article will give you some insight into what the differences may be between not only new, used & refurbished racking, but also the differences between the offerings from dealer to dealer.
New Pallet Racking
As you’d expect, new pallet rack is exactly what the name implies. New pallet rack is typically sold through authorized rack distributors. Rack distributors fit into two main categories: Stocking & Non-Stocking. The pricing that distributors provide can vary considerably. Stocking dealers and dealers who sell a larger volume of rack generally will get the best discounts from the manufacturers and will usually offer the best pricing to the customer.
Non-stocking distributors do not stock pallet rack, but rather buy & ship it directly from the manufacturer as they produce it. For this reason, rack purchased from non-stocking distributors will usually have a much longer lead time (4-12 weeks.) Rack purchased from stocking or non-stocking distributors typically comes with the same manufacturer’s warranty.
Used Pallet Racking
Used rack is rack that has been previously utilized by others. Used pallet rack can be found in conditions from ‘like-new’ with a few scratches to completely rusted or bent in places. Used rack can be a good investment for those looking to save money as long as the buyer takes some precautions. It is critical to validate not only the condition of the rack prior to purchase, but also the reputation of the dealer selling it. Start by finding dealers who have been in business for several years – the more the better. Check their web sites and avoid companies that don’t provide photos & descriptions of their equipment or if they don’t show pricing. The web site should also provide you with a physical address where the company resides, a phone number and the names of people you can talk to. They should also be able to verify that they own the equipment. Avoid dealers who will not let you inspect the racking before purchase. If the racking looks good and there’s little rust, the components should still have the same strength and capacity ratings it had when it was new.
Refurbished Pallet Rack
Refurbished pallet rack is another option available to rack buyers who want a lower priced alternative to new racking. Because there is little to no industry standardization for the term “Refurbished,” it is a good idea to ask what steps the supplier takes in their refurbishing process. While some dealers do a complete break-down, inspection & repair of the materials, some do not. The point is that not all refurbishing processes are the same. To make sure you’re getting what you pay for, equipment advertised as refurbished should go through many if not all of the following steps:
Each piece to be reconditioned is thoroughly inspected. Components that are found to be damaged, cracked or bent should be repaired or replaced by experienced professionals. Replaced components should equal or exceed the manufacturer’s original specifications.
Clean & Prep
During this stage, all stickers, tags, etc. should be completely removed (not just painted over.) Dirt, debris and rust should also be removed prior to paint. Chemical baths or wire brushes are the preferred methods of removing dirt or rust prior to painting. While sand-blasting may be a cheaper process, it can remove some of the metal from the racking which can compromise the structural integrity of the product. No matter what method is used, make sure your dealer can confirm and will stand behind the original capacity rating of the rack.
Items that have passed the prior two steps are ready for paint. There are many different methods of painting. Whatever method is chosen, it should utilize paint that is specially formulated for industrial applications. For industrial applications, powder coat, epoxy & heated enamels are superior to cold applied spray or latex.
Recently a new condition was introduced to the material handling industry. This ‘Renewed’ equipment provides “like-new” material at prices competitive with used or refurbished. Renewed products are manufactured as a blend of new & pre-owned materials that when combined, create a fully warrantied hybrid product that until recently, didn’t exist in the marketplace. Currently, SJF Material Handling is the only company offering renewed pallet rack.